Description
Specifications
| Hardware Specifications | RG-AP680-CD(V3) |
| 802.11n | Four spatial streams
???Radio 1??C?2.4 GHz: 2×2 MU-MIMO,?two spatial streams ???Radio 2??C?5 GHz:?4×4 MU-MIMO, two spatial streams Channels: ???Radio 1??C 2.4 GHz: 20 MHz?and?40 MHz ???Radio 2 ?C 5 GHz: 20 MHz?and?40 MHz Combined peak data rate: 0.6?Gbps ???Radio 1??C 2.4 GHz:?6.5 Mbps to?300 Mbps (MCS0 to MCS15 ) ???Radio 2 ?C 5 GHz:?6.5 Mbps?to?300 Mbps (MCS0?to?MCS15) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Packet aggregation: ???Aggregate MAC Protocol Data Unit (A-MPDU) ???Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
| 802.11ac | Two spatial streams
???Radio 2??C?5 GHz:?2×2 MU-MIMO, two?spatial streams Channels: ???Radio 2??C?5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 1.733?Gbps ???Radio 2??C?5 GHz: 6.5 Mbps to?1.733?Gbps (MCS0 to?MCS9) Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM Packet aggregation: ???Aggregate MAC Protocol Data Unit (A-MPDU) ???Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) |
| 802.11ax | Four spatial streams
???Radio 1??C?2.4 GHz:?2×2 uplink/downlink MU-MIMO,?two spatial streams ???Radio 2??C?5 GHz:?2×2 uplink/downlink MU-MIMO, two spatial streams Channels: ???Radio 1??C?2.4 GHz: 20 MHz?and?40 MHz ???Radio 2??C?5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz Combined peak data rate: 2.976?Gbps: ???Radio 1??C?2.4 GHz: 8.6 Mbps to?0.574 Gbps (MCS0 to?MCS11) ???Radio 2??C?5 GHz: 8.6 Mbps to?2.402?Gbps (MCS0 to?MCS11) Radio technologies:?uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA) Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM Packet aggregation: ???Aggregate MAC Protocol Data Unit (A-MPDU) ???Aggregate MAC Service Data Unit (A-MSDU) Dynamic Frequency Selection (DFS) Cyclic Delay/Shift Diversity (CDD/CSD) Maximum Ratio Combining (MRC) Space-Time Block Coding (STBC) Low-Density Parity Check (LDPC) Transmit beam-forming (TxBF) WPA3 |
| Antenna | Wi-Fi
???2.4 GHz: two?built-in directional antennas, with peak antenna gain of ?9 dBi. ???5 GHz: two?built-in directional antennas, with peak antenna gain of 9 dBi. Bluetooth ???One integrated vertically polarized omnidirectional antenna, t with peak antenna gain of 4.5 dBi. |
| Port | 1 x 2.5GE SFP port
1 x 10/100/1000Base-T port 1 x RJ45 console port (serial console port) 1?x Bluetooth 5.0 |
| Status LED | 1 x multi-color system status LED
???AP power-on status ???Software initialization status and upgrade status ???Uplink service interface status ???Wireless user online status ???CAPWAP tunnel?timeout ???Specific AP?locating Three single-color signal strength LEDs: ???Whether bridging is enabled ???Whether bridging is successful ???Wireless signal strength after successful bridging |
| Button | 1 x Reset button
???Press the button for shorter than 2 seconds. Then the device restarts. ???Press the button for longer than 5 seconds. Then the device restores to factory settings. |
| Dimensions (W x D x H) | Main unit:?251 mm x 168 mm x 64 mm (9.88 in. x 6.61 in. x 2.52 in.)
Shipping:?405 mm x 232 mm x 325 mm (15.94 in. x 9.13 in. x 12.79 in.) |
| Weight | Main unit: 1.5 kg (3.31 lbs)
Mounting bracket: 0.2 kg (0.44 lbs) Shipping: 2.92 kg (6.44 lbs) |
| Mounting | Wall/Pole-mounting (a mounting bracket is delivered with the main unit) |
| Input power supply | The AP supports the following two power supply modes:
???48 V DC/0.35 A power input over DC connector: The DC connector accepts 2.0 mm/6.3 mm center-positive circular plug. A DC power supply needs to be purchased independently. ???PoE input over ETH/PoE: The power source equipment (PSE) complies with IEEE 802.3af/at standard (PoE/PoE+). Note: If both DC power and PoE are available, DC power is preferred. |
| Maximum power consumption | Maximum power consumption: 12.95 W
???DC?power:?12.95?W ???802.3at (PoE+): 12.95?W ???802.3af (PoE): 12.95 W ???Idle mode: 6?W |
| Environment | Storage temperature: ?C40??C to +85??C (?C40??F to +185??F)
Storage humidity: 0% RH to 100% RH (non-condensing) Storage altitude: ?C500 m to +5,000 m (?C1640.42 ft. to +16,404.20 ft.) Operating temperature: ?C40??C to +65??C (-40??F to +149??F) Operating humidity: 0% RH to 100% RH (non-condensing) Operating altitude: ?C500 m to +4,000 m (?C1,640.42 ft. to +13,123.36 ft.) Note: At an altitude in the range of 1,800?C4,000 m (5,905.51?C13,123.36 ft.), every time the altitude increases by 166 m (544.62 ft.), the maximum temperature decreases by 1??C (1.8??F). |
| Mean Time Between Failure (MTBF) | 200,000 hours (22 years) at the operating temperature of 25??C (77??F) |
| System memory | 512 MB DRAM,?128 MB flash |
| Transmit power | 2.4 GHz
???Maximum transmit power: 28?dBm (631mW) ???Minimum transmit power:?10?dBm (10 mW) 5 GHz ???Maximum transmit power: 28?dBm (631mW) ???Minimum transmit power:?10?dBm (10 mW) Note: ???Adjusting the transmit power by percentage (recommended) and in 1dBm increments. ???The transmit power is limited by local regulatory requirements.?For details, see?WLAN Country or Region Codes and Channel Compliance. |
Reviews
There are no reviews yet.