RG-AP180(V3) Wi-Fi 6 Dual-Radio 2.976 Gbps Indoor Wall Plate Access Point

Indoor scenarios covering higher education, government,

general education, finance, hotels, and real estates

Highlight Features

  • Dual-radio wall plate AP with simple and beautiful design for easy deployment
  • Upgraded to Wi-Fi 6, a combined data rate of up to 2.976 Gbps
  • Enterprise-class security authentication for all-scenario protection
  • Unified cloud management, intelligent tuning, and easier O&M
Category:

Description

Specifications

Hardware Specifications RG-AP180(V3)
802.11n Four spatial streams

???Radio 1??C?2.4 GHz: 2×2 MIMO,?two spatial streams

???Radio 2??C?5 GHz:?2×2?MIMO, two spatial streams

Channels:

???Radio 1??C 2.4 GHz: 20 MHz?and?40 MHz

???Radio 2 ?C 5 GHz: 20 MHz?and?40 MHz

Combined peak data rate: 600?Mbps

???Radio 1??C 2.4 GHz:?6.5 Mbps to?300 Mbps (MCS0 to MCS15 )

???Radio 2 ?C 5 GHz:?6.5 Mbps?to?300 Mbps (MCS0?to?MCS15)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM

Packet aggregation:

???Aggregate MAC Protocol Data Unit (A-MPDU)

???Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

802.11ac Two spatial streams

???Radio 2??C?5 GHz:?2×2 MIMO, two spatial streams

Channels:

???Radio 2??C?5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

Combined peak data rate: 1.733?Gbps

???Radio 2??C?5 GHz: 6.5 Mbps to?1.733?Gbps (MCS0 to?MCS9)

Radio technologies: Orthogonal Frequency-Division Multiplexing (OFDM)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM

Packet aggregation:

???Aggregate MAC Protocol Data Unit (A-MPDU)

???Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

802.11ax Four spatial streams

???Radio 1??C?2.4 GHz:?2×2 uplink/downlink MU-MIMO,?two spatial streams

???Radio 2??C?5 GHz:?2×2?uplink/downlink MU-MIMO, two spatial streams

Channels:

???Radio 1??C?2.4 GHz: 20 MHz?and?40 MHz

???Radio 2??C?5 GHz: 20 MHz, 40 MHz, 80 MHz, and 160 MHz

Combined peak data rate: 2.976?Gbps:

???Radio 1??C?2.4 GHz: 8.6 Mbps to?0.574 Gbps (MCS0 to?MCS11)

???Radio 2??C?5 GHz: 8.6 Mbps to?2.402?Gbps (MCS0 to?MCS11)

Radio technologies:?uplink/downlink Orthogonal Frequency-Division Multiple Access (OFDMA)

Modulation types: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM

Packet aggregation:

???Aggregate MAC Protocol Data Unit (A-MPDU)

???Aggregate MAC Service Data Unit (A-MSDU)

Dynamic Frequency Selection (DFS)

Cyclic Delay/Shift Diversity (CDD/CSD)

Maximum Ratio Combining (MRC)

Space-Time Block Coding (STBC)

Low-Density Parity Check (LDPC)

Transmit beam-forming (TxBF)

WPA3

Antenna Wi-Fi

???2.4 GHz: two?built-in omnidirectional antennas, with peak antenna gain of?2.5 dBi.

???5 GHz: two?built-in omnidirectional antennas, with peak antenna gain of 6 dBi.

Bluetooth

???One integrated vertically polarized omnidirectional antenna, with peak antenna gain of 2 dBi.

Port Uplink: 1 x 10/100/1000Base-T port, compliant with IEEE 802.3af/at standard (PoE/PoE+)

Downlink: 4 x 10/100/1000Base-T ports

1 x micro USB?console port (serial console port)

1?x Bluetooth 5.0

Status LED 1 x multi-color system status LED

???AP power-on status

???Software initialization status and upgrade status

???Uplink service interface status

???CAPWAP tunnel?timeout

???Specific AP?locating

Button 1 x Reset button

???Press the button for shorter than 2 seconds. Then the device restarts.

???Press the button for longer than 5 seconds. Then the device restores to factory settings.

Dimensions (W x H x D) Main unit:?86 mm x 116 mm x 43 mm (3.39 in. x 4.57 in. x 1.69 in.)

Shipping:?128 mm x?96mm x?59 mm (5.04 in. x 3.78 in. x 2.33 in.)

Weight Main unit: 0.22 kg (0.49 lbs)

Shipping: 0.31 kg (0.68 lbs)

Mounting 86 mm junction box-mount
Input power supply The AP supports the following two power supply modes:

???12 V DC/1 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power supply needs to be purchased independently.

???PoE input over the backplane interface: compliance with 802.3af/at standard (PoE/PoE+)

Note:

???When powered by 802.3at (PoE+), the AP operates with the optimal performance.

???If both DC power and PoE are available, DC power is preferred.

Maximum power consumption Maximum power consumption: 10 W

???DC?power:?10 W

???802.3at (PoE+): 10?W

???802.3af (PoE): 10?W

???Idle mode: 3.5?W

Environment Storage temperature: ?C40??C to +70??C (?C40??F to +158??F)

Storage humidity: 5% RH to 95% RH (non-condensing)

Storage altitude: ?C500 m to +5,000 m (?C1640.42 ft. to +16,404.20 ft.)

Operating temperature: ?C10??C to +45??C (14??F to 113??F)

Operating humidity: 5% RH to 95% RH (non-condensing)

Operating altitude: ?C500 m to +5,000 m (?C1640.42 ft. to +16,404.20 ft.)

Note: At an altitude in the range of 2,000?C5,000 m (6,561.68?C16,404.20 ft.), every time the altitude increases by 166 m (544.62 ft.), the maximum temperature decreases by 1??C (1.8??F).

Mean Time Between Failure (MTBF) 200,000 hours (22 years) at the operating temperature of 25??C (77??F)
System memory DRAM:?2?GB

SPI:?8?MB

Nand:?128?MB

Transmit power 2.4 GHz

???Maximum transmit power: 21?dBm (126 mW)

???Minimum transmit power:?8?dBm (6.31 mW)

5 GHz

???Maximum transmit power: 21?dBm (126 mW)

???Minimum transmit power:?8?dBm (6.31 mW)

Note:

???Adjusting the transmit power by percentage (recommended) and in 1dBm increments.

???The transmit power is limited by local regulatory requirements.?For details, see?WLAN Country or Region Codes and Channel Compliance.

Reviews

There are no reviews yet.

Be the first to review “RG-AP180(V3) Wi-Fi 6 Dual-Radio 2.976 Gbps Indoor Wall Plate Access Point”

Your email address will not be published. Required fields are marked *